Main features:
BZC400ABC truck mounted drilling rig is designed by our engineers; it is adopt truck mounted and is a rotary drilling rig.
The truck chassis is adopt the 6×6 special chassis of brand NORTH BENZ, the main transmit, transmission power, gearbox, sets of windlass, mud pump, sewage pump,mast are setup on the chassis.
This rig is a rotary drilling rig with directional circulation, which is equipped with BW850/2A mud pump. It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit.
The power of drilling rig comes from the truck engine; the rig sets up distribute implement and hydraulic system.
We can set up the spare electric engine and clutch implement according to client's requirement, so that the rig can work with diesel engine or electric engine.
We can set up a generator (15kw) , so that it is convenient to illuminate or work at night.
The adding pressure implement is hydraulic, so it has a high efficiency when the rig drill on mud rock and weathering formation through using the adding pressure implement.
The master driving of rig is mechanical, the four jacks and mast are hydraulic operated. Distribute box, sewage pump, master driving clutch system are air operated.
The appearance of rig is pretty. It has a high efficiency because of having a larger torque of the turntable, it is mainly used for water well, construction, national defense building foundation, geological exploration, geothermic well and other foundation working. It is popular with domestic and foreign clients.
| Technical parameter |
| Drilling depth(M) |
80 |
400 |
| Drilling diameter(mm) |
1500 |
500 |
| Speed of turntable(r/min) |
117;102;60;38;22;13;16(reverse) |
| Torque of turntable(KN.m) |
5.4---50 |
| Single rope lifting capacity of windlass(KN) |
40 |
| The capacity of main windlass(KN) |
180 |
| Single rope lifting capacity of hydraulic windlass(KN) |
40 |
| The capacity of hydraulic windlass(KN) |
160 |
| The lifting capacity of hook(KN) |
180 |
| Bearing capacity of mast (KN) |
180 |
| The height of mast (mm) |
11500 |
| Bearing capacity (t) |
25 |
| Pipe |
Kelly (mm) |
108×108×7500 |
| Assistant pipe (mm) |
Ф89×10×6050 |
Hydraulic pump |
Model |
CBQL-F550/F532-CFHL |
| Pump delivery (ml/r) |
50/32 |
| Rated speed (r/min) |
2000 |
| Rated pressure(MPa) |
20 |
BW850/2A
plunger pump
|
Diameter of cylinder (mm) |
150 |
| Stroke of piston (mm) |
180 |
| Theory of flow (L / min) |
600 850 |
| Rated pressure (Mpa) |
3 2 |
| Pounding times (min-1) |
58 82 |
| Diameter of suction tube (mm) |
127 |
| Diameter of drain pipe (mm) |
64 |
| Input speed (r / min) |
470 |
| Input power (kw) |
40 |
| Overall dimensions (mm) |
2000*1030*1400 |
| Weight (t) |
1.5 |
Truck chassis |
Model |
NORTH BENZ |
| Drive form |
6×6 |
Engine |
Model |
WP10.270 |
| Rated power(KW) |
191 |
| Speed (r/min) |
2300 |
| Size (L*W*H)(mm) |
10230×2490×2870 |
| Electric generator |
Model |
MF |
| Rated power (kw) |
15 |
| Rated voltage(v) |
400 |
| Rated current(A) |
27 |
| Speed (r/min) |
1500 |
| Frequency(Hz) |
50 |
| Protection level |
IP21 |
| Insulation Class |
H |
| The best working gear (or speed) |
5th gear(1000-1400r/min) |
| The highest speed(Km/h) |
70 |
| Weight (kg) |
19350 |
| Transport size(L*W*H)(mm) |
12044*2490*3740 |
| Working size(L*W*H)(mm) |
10106*2490*13128 |
Selectable configuration:
Compressor
|
Brand |
Displacement |
Pressure |
Diesel engine |
Power |
| American Sullar1070XH |
30.3 m3/min |
2.41Mpa |
Caterpillar |
347Kw |
| Swedish Atlas XRVSI096 |
28.3 m3/min |
2.0Mpa |
Caterpillar |
328Kw |
| Japan PDSJI00S |
28.3 m3/min |
2.11Mpa |
Mitsubishi |
327Kw |
| Kaishan LGCY26/20K |
26 m3/min |
2.0Mpa |
Cummins |
298Kw |
| Hongwuhuan HG900/20 |
25.5 m3/min |
2.0Mpa |
Cummins |
239Kw |
DTH |
Origin |
Model |
Diameter |
Length |
Weight |
| South Korea |
TD50 |
130-152mm |
781mm |
62Kg |
| TD80 |
194-254mm |
1264mm |
180Kg |
| TD100 |
251-305mm |
1575mm |
350Kg |
| TD112 |
320-381mm |
1788mm |
618Kg |
Drill bit
|
DTH |
Diameter |
| TD50 |
146mm |
| TD80 |
216mm |
| 219mm |
| 250mm |
| Dust device |
Warranty
Kudat grants our clients a twelve-month-period or 1500-hours warranty for any machine purchased from us. During the warranty period, in case the defect of material or workmanship has occurred with spare parts in normal operation. The defective part will be repaired or replaced free of charge at our discretion.
Spare Parts
Kudat is dedicated to provide our clients with genuine spare parts with the highest quality, exact fitness and appropriate function. With our global distributor network, you are guaranteed with fast deliveries and services, wherever you are. Please submit your spare parts request to us, and list products name, model, equipment serial number, description of required parts. We guarantee that your request will be handled quickly and appropriately.
Installation & Maintenance
Kudat is able to provide you with the overall installation of complicated machinery and equipment, for example--crawler crane,concrete batching plant, crushing machines etc.,allowing you to start the normal operation of cranes immediately. After installation, we will make inspection of the whole machine, operate equipment, and provide you with testing data reports of installation and operation.
Training
Kudat offer perfect facilities and comfortable environment and can provide training service to different users. The training sessions include product training, operation training, maintenance know-how, technical know-how training, standards, laws and regulations training and other trainings, all of which are tailored to fulfill your individual needs. Training programs can be conducted in our factory field, or at the client's site.
Technical Advice
Kudat can also help clients coordinate with trained service personnel to provide you detailed and extensive knowledge about your specific machine. With our technical advices, your machine service life can be significantly prolonged and sustained with high capacity.
Audited Supplier 
){kind=link}