Rotary Drilling Rig 26m (YTZ26)

• Customization: Available
• Condition: New
• Motor: AC Motor
• Model NO.: YTZ26
• Drill Hole Diameter: >300mm
• Drill Hole Depth: 100-150m
• Bit Type: Cone Bit
• Drilling Way: Rotary
• Pressure Pile Driver Type: Hydraulic Pile Driver
• Pile Hammer Type: Hydraulic Hammer
• Power Source: Diesel
• Motor Power: 110kw
• Noise: with Noise
• Transport Package: Naked Packing
• Specification: 14.4*5.8*35.6
• Trademark: Kudat
• Origin: China
• HS Code: 8430412900
• Production Capacity: 500PCS/Year

Product Description

YTZ Series Walking Long Spiral Drilling Rig
YTZ series walking long spiral drilling rig is a new pile foundation construction machine with the hydraulic walking mechanism, electrically-controlled lifting and lowering mechanism, tri-ring reducer drive mechanism, long auger drilling mechanism and hydraulic cylinder landing gear. It is characterized by the high hole forming efficiency, high quality, no vibration, no noise, no pollution, less consumption of steel products, and high level of mechanization when constructing cast in situ piling pile. Therefore, the drilling rig is an ideal machine suitable for the urban construction, the construction of medium and high rise buildings as well as the road construction.
 
Working condition
The dry method construction is adopted and the circulation fluid is not used, which can reduce the equipment used for the circulation fluid and relevant works, and largely relieve the pollution on environment form the circulation fluid. Compared with the wet method drilling operation, the dry method has low cost, no slurry pollution and provides convenience for management.
The spiral drill rod equipped can promptly deliver the soil drilled out, so it is unnecessary to lift the drill tool to remove the soil. Meanwhile, it produces no static water pressure, which reduces the impacts on the bottom hole. When lifting the drill tool, the pipe can be fitted to ensure a high working efficiency.
When the spiral drill rod slews, it produces pressure on hole wall, which is in favor of the stability of the hole wall.
The output shaft of the power unit and the spiral drill rod are the hollow type. Besides the ordinary construction, if equipped with revolution joint, it can be used in many drilling technologies, such as grouting method, super flow concrete construction, etc.
When drilling in sand or gravel layer, compared with the hammering method and pile sinking method, it enjoys a more performance. Meanwhile, it effectively avoids endangering the adjacent buildings caused by the hammering method and pile sinking method.
 
Main Structural Feature
 
Drill tools
Depending upon the different geologic condition and construction requirement, this company makes available the drill tools including four series, namely, 400, 500, 600 and 800, and the drill bit with door at two sides, or the door at bottom or the high-pressure grouting for your selection. The drill depth can reach 30M.

Drill tower
The drill tower has round and rectangle structures with the round and rectangle rail in its front to direct the power unit to upwards and downwards as well as conquer the reverse torque from the power unit. The ladder is equipped fro examination and repair. The pulley block is mounted on the top of drill tower to lift and lower the power unit, reinforcement cage and pouring pipe.
 
Swing System
The slewing gear is driven by a medium speed hydraulic motor via a one-stage planetary reduction gear, which can driven the drilling rig to rotate 360 degree under role of the four support oil cylinder. Because the hydraulic motor is characterized by stable power, stable operation, small rotation, free of impact and vibration and favorable stability and long service life.
 
Power unit
The power unit is connected to a verticals motor and tri-ring reduction gear, of which, the tri-ring reduction gear, as the power source of this drilling rig, transfer the power to output shaft to drive the drilling tool. For this drilling rig, ZZSH tri-ring reduction gear is equipped and power unit made by the China first-Class brand motor factory is adopted to ensure a large torque output and high reliability

	YTZ30	YTZ26	YTZ20
Drilling diameter (mm)	400,500,600,800	400,500,600,800	400,500,600,800
Max. drilling depth (M)	400-600mm 30M     800mm 25M	400-600mm 26M     800mm 22M	400-600mm 20M     800mm 16M
Max. output torque of power unit kN.M)	48.4	48.4	48.4
Drilling speed of power unit (rpm)	21.7	21.7	21.7
Motor power of power unit (kW)	2x55	2x55	2x55
Max. pulling force (KN)	480	300	240
Travel step length (mm)	1500	1300	1100
Revolution speed (rpm)	0-0.88	0-0.89	0-1.38
Single rope lifting force of main winch (kN)	80	50	30
Lifting average speed of main winch (m/min.)	18	25	10
Single rope lifting force of auxiliary winch (kN)	25	20	10
Lifting average speed of auxiliary winch (m/min.)	12	10	12.5
Overall dimension at working state (m)	14.4x5.8x35.6	12x5.2x31	10x4.9x24.7
External dimension at transportation state (m)	12x3.1x3	10.5x3.1x3.4	13.3x3.1x3.8
Gross weight including drilling tools (T)	60	45	35