3660mm width 130HP motor grader KGR135
1.True Photos
2.Specification
| Basic specification |
| Engine model |
Dongfeng Cummins 6BTA5.9(130HP) |
| Rated power/speed |
100kw/2200rpm |
| Dimension(LxWxH) |
8015×2380×3050mm |
| Operating weight(Standard) |
11000kg |
| Module weight on front wheel |
3300kg |
| Module weight on rear wheel |
7700kg |
| Tire size |
13.00-24TG RP12 |
| Min. ground clearance |
410mm |
| Distance between front and rear axles |
5780mm |
| Distance between middle and rear wheels |
11541mm |
| Performance specification |
| Travelling speed ,forward |
5,8,13,20,30,42km/h |
| Travelling speed ,reverse |
5,13,30km/h |
| Tractive force(f=0.75) |
61.3KN |
| Max. gradeability |
20% |
| Tire inflation pressure |
300kPa |
| Working hydraulic pressure |
16MPa |
| Transmission pressure |
1.3~1.8MPa |
| Operating specification |
| Max. steering angle of front wheels |
±49° |
| Max. lean angle of front wheels |
±17° |
| Max. oscillation angle of front axle |
±15° |
| Max. oscillation angle of balance box |
Forward & back 16 |
| Frame articulation angle |
±27° |
| Min. turning radius using articulation |
6.6m |
| Blade |
| Maximum lift above ground |
410mm |
| Maximum depth of cutting |
535mm |
| Maximum blade position angle |
90° |
| Blade cutting angle |
28°-70° |
| Circle reversing rotation |
360° |
| Moldboard width X height |
3660×610mm |
3.Configuration
1.Dongfeng Cummins
6BTA5.9(130HP)
2.customized axle
3.imported world famous differential mechanism
4.Hangzhou Advance gearbox
5.imported world famous hydraulic components
6.customized air-condition cabin
7.3660mm width moldboard
8.equipped rotary support and overloaded protection for worn box
4.Optional Parts
1.front dozer
2.rear ripper
3.rotary support
4.overloaded protection for worn box
5.automatic leveling device
6.front ridger
7.snow remover
8.hydraulic pull-pin
9.cold and warm condition
10.ZF box
Audited Supplier 
){kind=link}
){kind=link}