Hth3400b Concrete Paver with 3.4-6m Paving Width
- Model NO.: HTH3400B
- Object: Cement Concrete Pavement
- Mixing Method: Continuous Drum
- Product Capacity: 40～400t/h
- Condition: New
- Maximum Paving Width: 6m
- Paving Speed: 0-10m/Min
- Flatness: 3mm/3m
- Rating Power: 145kw
- Overall Weight: 22tons
- Specification: SGS
- HS Code: 84791021
- Type: Paver
- Moving Type: Mobile
- Automatic Grade: Automatic
- Certification: ISO9001: 2000, CE
- Standard Paving Width: 3.4m
- Paving Thickness: 0-350mm
- Grade Ability: at Work:≥10%
- Engine Model: Volvo Tad620ve
- Rating Rotate Speed: 2300r/Min
- Trademark: Kudat
- Origin: China
The technology of HTH3400B slipform is advanced PAV-SAVER imported from American Pro-Hoff Company, to build high speed railway and highway, using of this paver can greatly improve paving quality and speed, therefore, it is widely used to construct high speed railway, highway, plaza etc
The paver is full hydraulic slipform, with big power, and the machine travels with two crawlers. The automatic driving and leveling control systems are equipped in this machine. When working, the paver can accomplish paving, scraping, vibrating, tamping, extruding, shaping at one time.
Basic paving width 3400 mm
Maximum paving width 6000 mm
Maximum paving thickness 350mm
Overall weight 22T
Paving speed 0~10m/min
Travel speed 0~1.5km/h
Flatness (surveyed by 3 meters ruler) 3mm/3m
Grade ability At work: ≥ 10%;
Type 6 cylinders; Water-cooling
The whole machine is full hydraulic, the engine is connected with transfer and pumps, supplying power for many components as follows:
1. Crawler traveling devices
2. Feeding devices
4. Tamper bar
5. Body lifting and dropping
6. Water cleaning system and all the executive cylinders
Consist of a pump, motors and control system.
Two crawlers bear the weight of the whole machine, and the patch area of every crawler is 3000× 320mm
Control the rotate speed of travel motor by potentiometer and steering sensors, the purpose of steering and automatic steering can be achieved.
Controlled by centralized controllers, displayed by picture and words; With function of failure diagnose, condition display, alert alarms etc, voltage 24V.
Wide view, buttons centralized located, easy to operate.
Automatic leveling unit:
With four leveling unit and one steering sensor to adjust the body carriage and automatic steering automatically according to line transect.
1. Crown pan basic width...3.4-6m
2. Vibrators frequency...5~167 Hz
3. Tamper bar rotate speed...0~170 r/min
4. Screw rotate speed...0~34 r/min
Main performance characteristics of the HTH3400B SLIPFORM
1. Original VOLVO water-cooling engine is used to supply driving and reliable powers.
2. Full hydraulic driven, with CAN communications management bus and distributed control structure, reduce failure rate.
3. With failure intellective diagnose function, alarm for potential failure.
4. The screw can be controlled from either side of the paver, so the effect of feeding is perfect
5. The operator has wide view, easy to observe.
6. The material of screws and crown pan is wearable and advanced in the world.
7. Because of the using of automatic leveling, the lengthwise flatness is not exceed 3mm/3m, the transverse grade: 2/1000.
8. Crawlers with life-time lubricated thrust wheels and track shoes wear well and are difficult to skid.
9. It can accomplish the cement concrete paving at one time, and finish middle piling and side piling.